Products

Dura-Pump™ Cartridge Kit with O-ring and Bottom Gasket

$333.00$355.00

SKU DP-P6017A Categories , , , , ,

Description

Dura-Pump™ Cartridge Kit with O-ring and Bottom Gasket – Herbicide Pump Repair

 

Dura-Pump™ Cartridge Kit with O-ring and Bottom Gasket herbicide pump repair part allows you to repair your Dura-Pump™ in the field.  The Dura-Pump™ is easily field serviceable with Dura Products’ repair parts.

 

Dura-Pump™ sold separately

Dura-Pump™ features

  • High-Flow with up to 18 GPM free flow rate
  • Self-priming diaphragm pump with internal by-pass
  • Motor thermally protected from overheating
  • 30 minute duty cycle
  • Suction port has 2″ Male NPT and 1″ Female NPT
  • Pump is easily field serviceable
  • Features 2 Year Maintenance & Warranty Plan

 

Dura Products high-flow Dura-Pump™ can pump up to 18 Gallons per Minute (68 liters per minute).  It is a self-priming diaphragm pump with internal by-pass.  Additionally, the motor is thermally protected from overheating.

 

The Dura-Pump™ is easily field serviceable, so you can extend the life of your pump with simple repairs.  It has 30 minute duty cycle.  Finally, all Dura Products come standard with a 2-Year Warranty & Maintenance Program, so you can be confident in your purchase.

 

Herbicide Pump Additional Specifications

  • Vertical Suction Lift:  Self-priming to 10ft, 3m
  • 12 Volt power cord is 20ft, 6m
  • Motor:  1/4 HP; 186W
  • Amps:  12 Volt: 18.5
  • Discharge Port:  1″ Female NPT Thread
  • Wetted materials:  Polypropylene, Santoprene, EPDM, Viton or Silicone Seals, 304 Stainless Steel

Additional information

Weight 5 lbs
Dimensions 12 × 12 × 12 in

EPDM vs VITON Seals

EPDM seals are good in steam applications and offer excellent chemical resistance to a variety of acids and alkalines. Fairly good in ketones and alcohols. Not recommended for use in applications involving petroleum oils, strong acids, or strong alkalines. They have exceptionally good weather aging and ozone resistance. Temperature rating is from -20ºF to +225ºF (250ºF intermittent service).

 

Viton® seals have excellent chemical resistance. They can be used in most applications involving mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils. They are particularly good in hydrocarbon service. Not suitable for steam or hot water service. Temperature rating is from -20°F to +300°F.

 

Help Me Choose

Install Instructions

You may also like ...

No products were found for this query.

Related products